IVM/51 COMPLETE BRAKE SHOES PAINTING PLANT
This is a plant engineered to paint,dry and automatically unloading during a continuous process.The loading of the brake shoes is done by magnetical bars.

PSM/02 – PSM/03 ADHESIVE LINING COATER
It is used to coat the adhesive on every kind of brake linings, either bent, either plan.

TP/A 04 CUT + ADHESIVE COATING MACHINE
The machine automatically unrolls the lining from a roll holder, measures the exact programmed length, cuts the single piece and process with adhesive roll coating from the top side so to deliver the piece automatically on a conveyor

PLATE/P PNEUMATIC UNIVERSAL ASSEMBLY EQUIPMENT
It enables assembly of brake linings together with brake shoes, through use of pressure bands (PB series) and clamps (MP series). It reduces considerably the operation times and keeps constant the production in comparison with the hand operated assembly plate, to eliminate the effort asked to the operator for the tension of pressure bands.

ROBOT/A PNEUMATIC AUTOMATIC UNIVERSAL ASSEMBLY EQUIPMENT
The automation allows the disassembling of the jacks coming from the glue tempering oven, with automatic unloading of the baked shoes into special containers; conveyor belts, to convey the finished pieces to a place other than these containers, are available on request. The operator has only to place the jack to be disassembled and the shoes to be assembled on the bench.

MAEU OVENS STATIC DRYING/VULCANISATION OVEN
The air is introduced in these ovens from the ceiling’s centre by an apposite breather, passes through on the electric armoured resistors positioned on the left and on the right of the paddlewheel fan and it’s sent in the two tunnels obtained in the side faces .At the same time the air is sent also on the oven’s ground. So, in this manner ,all the room and the objects in it contained are regular heated .This cycle is repeated since to the end of the work.

F71 RE/C INFRARED CURING OVEN SINGLE BODY
F 71 RE/C oven makes, by conveyor cycle, the adhesive curing for the car brake shoes bonding. The oven is built in metal trestle, having the walls insulated with glass wool, in order to keep the heat, given by the heating elements, inside the oven.Near this oven can be used our PLATE/P.

F 72 RE/C INFRARED CURING OVEN DOUBLE BODY
F 72 RE/C oven makes, by conveyor cycle, the adhesive curing for the car brake shoes bonding. The oven is built in metal trestle, having the walls insulated with glass wool, in order to keep the heat, given by the heating elements, inside the oven.Near this oven can be used two PLATE/P or our ROBOT/A

AF 400 BS HOT AIR MULTIFUNCTIONAL DRYING/BONDING OVEN
Vertical conveyor bonding oven, suitable for industrial productions of brake shoes and different brake particulars.With the same structural engineering this oven can be used for the following operations - bonding assembled brake shoes (G type) - vulcanising antinoise paste Euro.Rigan 618.14 applied on the back of the pads - drying the metal supports just after the adhesive application with Euro.Rigan VM 04 or VM 45 equipments - drying brake linings just after the adhesive application with Euro.Rigan PSM 02 or PSM 03 equipments

MP 09 /MP10 / MP11 / MP M1 / MP M2 CLAMPS FOR LITTLE-MEDIUM-BIG BRAKE SHOES
Particularly employed for mass-production with static (MAEU series or AF 400 BS ) and dynamics bonding ovens (F 71 RE/C or F 72 RE/C ) They are bound with the pressure band length (PB series), which is asked to be in accordance with the used brake shoes.

PB/20-45 PB 50-90 STAINLESS STEEL PRESSURE BANDS FOR CLAMPS
They are indispensable to keep a tight contact between brake shoes and brake lining during the assembly operation and the curing process. For the brake shoes with projection, there are available special pressure bands with slit.

VM/ 04 ADHESIVE APPLICATION MACHINE
Adhesivizing machine VM 04 is designed, depending from the accessories, to realize the function to depose an adhesive’s film on the metal plate disk pad.

VM/05 ANTINOISE APPLICATION MACHINE
Coating machine VM 05 is designed, depending from the accessories, to realize the function to depose an antinoise layer on the back of the brake disk pads.

VM/45 ADHESIVE & ANTINOISE APPLICATION MACHINE
VM 45 double machine borns to apply an adhesive film on the brake disk metal supports and to spread an antinoise paste (Euro.Rigan 618.14) layer on the back of finished brake pads disk.It’s engineered on the same loom to reduce de costs in comparison of two different machines (VM 04 and VM 05).

VM/06 DOUBLE ROLL ADHESIVISING MACHINE
The up and down double roll adhesivizing machine borns to apply ,in one touch passage,an adhesive film on a clutch disk

SRV/4 ADHESIVE SPRAY MACHINE
This equipment borns to apply in high production ( 4000 pcs/hour) by spray method, our low viscosity adhesive 34 FBF/V on the metal brake pads. The metal brake pads, after sand blasting operation, are manual disposed on vessels (with close or grate bottom) .

DRY 05 TUNNEL DRYING OVEN FOR BRAKE PADS ADHESIVISED METAL SUPPORTS
The dry tunnel oven DRY 05 borns to achieve a good and quickly drying of the adhesivized metal brake disk supports outgoing from Euro.Rigan machine VM 04 or VM 45.

SHEAR TEST MACHINE MO 65 SHOES TESTING MACHINE FOR PRODUCTION TEST & STUDY (SHEAR TEST)
Machine used to determine the adhesion strength (shear test) between the friction material and the metallic brake shoe to which it’s bonded. It works under International Norms SAE J840 and / or ISO 6312